Every pool owner should check the most important parameters in his pool at regular intervals. This is the only way to ensure that water quality is maintained at correct levels and arrange dosing in an optimum manner. The Lovibond Scuba 3s enables the operator to check pool water quickly and accurately. The integrated sample chamber is filled by immersing it in the water. A tablet reagent is added and generates a characteristic colour which is measured using the photometric principle. The result is then displayed on the screen. Six parameters, free chlorine, total chlorine, pH, alkalinity, stabiliser (cyanuric acid) and calcium hardness are measured within a few minutes. Water analysis becomes a pleasure rather than a chore and more time is left for enjoying the pleasure of the pool. If the Lovibond Scuba 3s falls into water it will simply float and, of course, it is watertight.
• Modern, ergonomic design
• User friendly Handling
• Large display
• Waterproof* as defined in IP X7, 1 hour at 0.1 meter, buoyant
• Wireless data transfer via NFC
• Light signal (green/red) to indicate safe water conditions
The Lovibond Scuba 3s utilises Photometer tablets to carry out measurements. These tablets are the same used in the PCCheckit, CheckitDirect, MD100, MD200 and other Lovibond® Photometers and are synonymous with the quality and accuracy expected from Lovibond® products.
Contents: Scuba 3s in a robust plastic box, Tablet reagents - 20 of each DPD1 & Phenol Red, 10 of each DPD3, CyA-Test, Alka-M, Calcio-H No.1, Calcio-H No.2, 2 batteries (AAA), Stirring rod, Instruction manual.
Chlorine: 0.01 - 6.0 mg/l
pH: 6.5 - 8.4
Cyanuric Acid: 20 - 120 mg/l
Alkalinity: 5 - 300 mg/l
Calcium Hardness: 50 - 500 mg/l
